Amped Wireless TAP-EX2 - High Power Touch Screen AC750 Wi-Fi Range Extender - Manual (Page 103)

TAP-EX2 USER’S GUIDE
102 102
I cannot find my Home Network when scanning for Wi-Fi networks in the Setup Wizard.
a. The Range Extender may be out of range. Move the Range Extender closer to the Wi-Fi router and try
the Setup Wizard again from the Touch Screen Menu. It is recommended that your Home Network
shows a signal strength of 70% or greater in the Wizard SCAN results.
b. From the touch screen Dashboard, go to Settings then the Wi-Fi Settings menu to access Wireless
Coverage settings. Make sure the setting is at 100% and try again.
c. Make sure that your Home Network’s Wi-Fi SSID is broadcasting and not hidden. If your Home Network
SSID is hidden, you will need to manually setup the Range Extender through the Wi-Fi Settings > Home
Network Settings menu.
My Range Extender was working fine previously, but now I can no longer access the Internet through the
Range Extender. Or, I had a
POWER OUTAGE and now the Range Extender no longer works.
The Range Extender should automatically heal itself and reconnect to your wireless network. However, in the
event that it does not and you are not able to access the Internet or your home network please try the following
options: