Amped Wireless TAP-EX2 - High Power Touch Screen AC750 Wi-Fi Range Extender - Manual (Page 104)

TAP-EX2 USER’S GUIDE
103 103
a. The connection to your Home Network has been dropped. This can be caused by several events to your
home Wi-Fi connection. When this occurs, simply run the Setup Wizard again from the Touch Screen
Menu and reconfigure the Range Extender.
b. Reboot the Range Extender, wait 3 minutes for the Range Extender to reconnect to your network and
try to access the Internet.
c. The Range Extender automatically reconfigures itself in the event of a channel change on your router.
However, in the case that it does not, check to see that your home Wi-Fi router settings have not
changed. Any changes to the SSID, security, or channel number from the original settings will disconnect
the Range Extender’s connection to the home network. A power outage can cause a change in the
channel of your router. To solve this simply run the Setup Wizard again from the Touch Screen Menu
and reconfigure your Home Network connection. You can also set a static channel number on your
router to prevent this from happening again in the future.
d. Check to see that your home Wi-Fi router is still on. If it has been turned off please turn it back on. The
Range Extender should automatically reconnect to your Home Network within 10 minutes.
e. If the range extender does not automatically reconnect, try rebooting the Range Extender by
unplugging the power cable and plugging it back in.