Amer Networks WLO220T CLI - Manual (Page 92)

. . . . .
C O M M A N D D E S C R I P T I O N S
transparent
CLI Reference Guide 89
bmcast
Enable/disable bridging of non-IP (neither ARP nor MPLS) broadcast and multicast packets.
The default setting is to NOT to bypass (allow) the bridging of non-IP broadcast and multicast
packets.
ddos
Enable/disable DDOS on the bridged packets. The default setting is not to bypass DDOS.
mpls
Enable/disable bridging of MPLS packets. The default setting is to bypass (drop) the bridging
of MPLS packets.
unicast
Enable/disable bridging of non-IP (neither ARP nor MPLS) unicast packets. The default setting
is to bypass (drop) the bridging of non-IP unicast packets.
vlan-policy
Enable/disable source-zone derivation based on VLAN-tag for policy lookups. The default
setting is to bypass the derivation of source zone is based on the VLAN-tag of the received
packet. If it is bypassed then the source zone is derived on the physical ingress port.