Amer Networks WLO220T CLI - Manual (Page 56)

. . . . .
C O M M A N D D E S C R I P T I O N S
ntp
CLI Reference Guide 53
ntp
Use the ntp commands to configure the device for Simple Network Time Protocol (SNTP). SNTP
is a simplified version of NTP, which is a protocol used for synchronizing computer clocks in the
Internet. This version is adequate for devices that do not require a high level of synchronization
and accuracy. To enable the SNTP feature, use the set clock ntp command.
Syntax
Keywords and Variables
interval
set ntp interval number
unset ntp interval
interval
Defines in minutes how often the device updates its clock time by synchronizing with the NTP
server. The range for the synchronization interval is from 1 to 1440 minutes (24 hours).
Example
The following command configures the device to synchronize its clock time every 20 minutes:
set ntp interval 20
server
set ntp server { ip_addr | dom_name }
set ntp server { backup1 | backup2 } { ip_addr | dom_name }
unset ntp server { backup1 | backup2 }
exec exec ntp [ server { backup1 | backup2 | primary } ] update
get get ntp
set set ntp
{
interval number |
server
{
ip_addr | dom_name |
backup1 { ip_addr | dom_name } |
backup2 { ip_addr | dom_name } |
}
}
unset unset ntp
{
interval |
server { backup1 | backup2 }
}