Amer Networks WLO220T CLI - Manual (Page 14)

. . . . .
C O M M A N D D E S C R I P T I O N S
alert
CLI Reference Guide 11
alert-name
set alert … alert-name …
Example
The following command creates or modifies the alert named aggr-bandwidth-limit:
set alert aggr-bandwidth aggr-bandwidth-limit threshold 100 action shape
freq-value
This value specifies when an alert that has already been logged should be logged again. The value
is the minimum number of seconds between re-logging events which, by default, is 60. A value
of 0 indicates that the alert should only be logged the first time. This option provides the customer
a method to notice persistent conditions even if the first event may have gotten lost in a burst of
events.
Example
The following command creates an alert that causes an event if there are 10 or more connection
attempts in a second. When an event occurs more than 10 seconds after the previously logged
event, a new event is added to the log.
Set alert conn-rate conn-alert 10 action log always frequency 10
threshold-value
set alert … threshold threshold-value …
Example
The following command sets the threshold for triggering the alarm to be 100 Kbps:
set alert aggr-bandwidth aggr-bandwidth-limit threshold 100 action shape