Amer Networks WLO220T CLI - Manual (Page 36)

. . . . .
C O M M A N D D E S C R I P T I O N S
group
CLI Reference Guide 33
group
The group commands are used to group multiple addresses or multiple services together in one
group. A group allows to reference a group of addresses or services by a single name in a policy.
This eliminates the need for a separate policy for each address or service.
[NOTE] Although a single policy might reference a service group with three members, the device generates
multiple internal rules from that policy. Overusing address and service groups with high member counts can
unexpectedly consume internal resources.
Syntax
Keywords and Variables
add
set group address zone grp_name [ add mbr_name ]
set group service grp_name [ add mbr_name ]
add name_str
Adds an address or service named mbr_name.
Example
The command below creates an address group called sales for the Trust zone and adds the
address sales-eng to the group:
set group address trust sales add sales-eng
address
get group address zone [ ... ]
set group address zone grp_name [ ... ]
unset group address zone grp_name [ ... ]
get get group
{
address zone [grp_name ] |
service [grp_name ]
}
set set group
{
address zone grp_name [ add name_str ] |
service grp_name [ add name_str ] }
unset unset group
{
address zone grp_name [ remove mbr_name] |
service grp_name [ remove mbr_name]
}