Amer Networks WLO220T CLI - Manual (Page 12)

. . . . .
C O M M A N D D E S C R I P T I O N S
admin
CLI Reference Guide 9
manager-ip
set admin manager-ip ip-addr mask
If the subnet address is set to 255.255.255.0 all the addresses in the class C address range (i.e.
192.168.1.x) will have access to the box.
password
set admin password pswd_str
set admin-r password pswd_str
password
Specifies the password (pswd_str) for admin and admin-r. The maximum length of the
password is 31 characters, including all symbols except the special command character “
?.”
After this command is entered the user will be prompted to enter the password again.
top-talkers
set admin [netflow][top-talkers]
Example
The following command marks the admin rule as flow-candidate. Use this command only when
you can export the admin flow.
set admin [netflow]
server-name
set admin mail server-name ip_addr
server-name
The IP address or name of the Simple Mail Transfer Protocol (SMTP) server. This server will
forward email notifications of system alarms and traffic logs to the email addresses specified.
Example
The following command specifies a SMTP server at IP address 192.168.1.168:
set admin mail server-name 192.168.1.168
Defaults
The default password for both admin and admin-r is password.