Amer Networks WLO220T CLI - Manual (Page 18)

. . . . .
C O M M A N D D E S C R I P T I O N S
clock
CLI Reference Guide 15
clock
The clock commands are used to get and set the system time.
Syntax
Keywords and Variables
Variable Parameter
set clock date time
date time
Configures the correct current date and time on the device. Specify the date and time using
the following formats: (mm/dd/yyyy hh:mm or mm/dd/yyyy hh:mm:ss).
Example
The following command sets the clock to November 9, 2005, 3:45 a.m.
set clock 11/09/2005 3.45
[NOTE] By default, the device automatically adjusts its system clock for daylight savings time.
dst-off
set clock dst-off
unset clock dst-off
dst-off
Turns off the automatic time adjustment for daylight saving time.
ntp
set clock ntp
unset clock ntp
ntp
Configures the device for Network Time Protocol (NTP), which synchronizes computer clocks in
the Internet.
timezone
set clock timezone number number
get get clock
set set clock {date time | dst-off | ntp | timezone number number }
unset unset clock {dst-off | ntp | timezone number number}