Amer Networks WLO220T CLI - Manual (Page 88)

. . . . .
C O M M A N D D E S C R I P T I O N S
top-talkers
CLI Reference Guide 85
outgoing-interface
set top-talkers match outgoing-interface interface-name
outgoing-interface
The match criterion is based on the outgoing interface. The default is to ignore the outgoing
interface.
Example
The following command informs the software to ignore a flow if its outgoing interface is not
eth1.w.
set top-talkers match outgoing-interface eth1
TOS
set top-talkers match tos {tos-byte | dscp }
TOS
The match criterion is based on the type-of-service (TOS). You can configure TOS by
specifying the TOS-byte or the dscp value. The default is to ignore the TOS. The value range
for dscp is 0-63. The value range for TOS is 0-255.
Example
The following command informs the software to ignore a flow if its dscp value is not 24.
Set netflow match tos dscp 24