Amer Networks WLO220T CLI - Manual (Page 46)

. . . . .
C O M M A N D D E S C R I P T I O N S
interface
CLI Reference Guide 43
manage
Enables or disables monitoring and management capability through the interface.
 http Enables (or disables) http through the interface.
 https Enables (or disables) https through the interface.
 ping Enables (or disables) pinging through the interface.
 snmp Enables (or disables) snmp through the interface.
 ssh Enables (or disables) SSH management through the interface.
Example
The following command enables management of SSH through interface ethernet1:
set interface eth1 manage ssh
manage-ip
set interface interface manage-ip ip_addr
unset interface interface manage-ip
manage-ip
Defines the Manage IP address for the specified physical interface. External applications such
as Telnet or SSH can use this address to configure and monitor the device. (This address must
be in the same subnet as the interface IP address.)
Example
The following commands bind interface ethernet1 to the trust zone, and set the Manage IP
address to 10.1.10.23:
set interface eth1 zone trust
set interface eth1 manage-ip 10.1.10.23
mtu
set interface interface mtu number
unset interface interface mtu
nat
set interface interface nat
protocol
set interface interface protocol protocol
unset interface interface protocol
phy
set interface interface phy { ... }