Amer Networks WLO220T CLI - Manual (Page 90)

. . . . .
C O M M A N D D E S C R I P T I O N S
trace-route
CLI Reference Guide 87
trace-route
Use the trace-route command to display the route to a host.
Syntax
trace-route { ip_addr | name_str } [ hop number [ time-out number ] ]
Keywords
Variable Parameters
trace-route ip_addr
trace-route name_str
hop
trace-route { ip_addr | name_str } hop number [ ... ]
ip_addr | name_str
The IP address (ip_addr) or object name (name_str) of the host.
hop
The maximum number of trace route hops (number) to evaluate and display.
Example
The following command:
• Evaluates and displays up to four route trace hops
• Sends the output to a host with IP address 172.16.10.10
trace-route 172.16.10.10 hop 4
time-out
trace-route { ip_addr | name_str } hop number time-out number
time-out
Specifies the amount of time in seconds (number) to elapse before abandoning the current
hop of the route trace.
Example
The following command performs a trace-route operation.
• Evaluates and displays up to four route trace hops
• Sends the output to a host with IP address 172.16.10.10
• Specifies a timeout value of four seconds
trace-route 172.16.10.10 hop 4 time-out 4