Amer Networks WLO220T CLI User Manual
Page 77
C O M M A N D D E S C R I P T I O N S
service
2
74
CLI Reference Guide
protocol
- Defines the service by IP protocol.
- Defines a protocol for the specified service.
tcp specifies a TCP-based service.
udp specifies a UDP-based service.
Example
The following command sets a service named “ipsec” that uses protocol 50:
set service ipsec protocol 50
src-port | dst-port
set service
svc_name
protocol
{ ... }
[
src-port
number
-
number ] [
dst-port
number
-
number
]
src-port
Defines a range of source port numbers valid for the service and protocol.
dst-port
Defines a range of destination port numbers valid for the service and protocol.
Example
The following command sets a service named “test1” that uses destination tcp port 1001:
set service test1 protocol tcp src-port 0-65535 dst-port 1001-1001
timeout
get service timeout
{
other
|
tcp
|
udp
} ]
set service svc_name timeout
{
number
|
never
}
unset service svc_name timeout
timeout
Sets or displays the timeout value for session sessions created on a port for TCP, UDP, or other
protocols. You can specify session timeout value (
user
get service user
user
Displays all user-defined services.
Defaults
The default timeout for TCP connections is 30 minutes.