Amer Networks WLO220T CLI - Manual (Page 16)

. . . . .
C O M M A N D D E S C R I P T I O N S
all
CLI Reference Guide 13
all
The all command is used to return all configuration settings and software to the factory default
settings. The configuration file, which stores the saved configuration settings of the box, is
restored to factory default. A reboot is required to bring the boot back to the factory-default
configuration.
Syntax
unset all
Keywords and Variables
None.
Example
In the following example, the device is reset to its factory default settings and reset the device.
1.Execute the unset all command.
unset all
2. The following prompt appears: “Erase all system config, are you sure y / [n]?”
3. Press the Y key. This returns the system configuration to the factory default settings.
4. Execute the reset command.
reset
5. The following prompt appears: “Configuration modified, save? [y] / n”
6. Press the N key. This action generates the following prompt: “System reset, are you sure? y /
[n] n”
7. Press the Y key. This action restarts the system. The device now has its original factory default
settings.