Route, Defaults – Amer Networks WLO220T CLI User Manual
Page 71

C O M M A N D D E S C R I P T I O N S
route
2
68
CLI Reference Guide
route
set route ip_addr/mask [ ...]
unset route ip_addr/mask [ ... ]
route
Configures routes for the routing table.
ip_addr/mask Specifies the IP address that appears in the routing table.
gateway ip_addr Specifies the gateway for the next hop.
id id_num Displays information for the route that matches the ID number. The ID
number is a system-assigned number that you can see when you enter the get route
command with no options
interface interface Specifies the interface on which a packet for this route is to be
forwarded.
ip ip_addr Displays the route for the specified IP address.
prefix ip_addr/mask Displays the routes within the specified subnet address.
Defaults
The get route command displays all entries in the route table unless a particular target IP
address is specified.