Amer Networks WLO220T CLI - Manual (Page 79)

C O M M A N D D E S C R I P T I O N S
session
2
76 CLI Reference Guide
session
Use the session commands to clear or display entries in the session table.
The session table contains information about individual sessions between hosts that communicate
through the device. Every time the device initiates a new session, it creates a session entry and
uses the information in the entry while processing subsequent traffic between the hosts. Because
each session entry uniquely identifies two communicating hosts, it contains a unique combination
of the following criteria:
• An individual IP address for the source host (no subnets with multiple addresses).
• An individual IP address for the destination host (no subnets with multiple addresses).
• An individual port number for the source host (not a range of ports).
• An individual port number for the destination host (not a range of ports).
Syntax
Example
The following command displays all sessions:
get session
clear clear session
get get session