Welltech FXS SIP Gateway V.2.9 - Manual (Page 98)

- 86 -
FXS Gateway Overview
Initialize OSS libraries...OK!
VP v1.42 stack open successfully.
login:
Figure 21-16 flash –clean command
21.7.5 [commit]
Save changes after configuring Gateway.
usr/config$ commit
This may take a few seconds, please wait..
Commit to flash memory ok!
usr/config$
Figure 21-17 commit command
Note:
Users shall use [commit] to save modified value, or they will not be activated after
system reboot.
21.7.6 [ifaddr]
Configure and display Gateway network information.
usr/config$ ifaddr
LAN information and configuration
Usage:
ifaddr [-print]|[-dhcp used]|[-sntp mode [server]]
ifaddr [-ip ipaddress] [-mask subnetmask] [-gate defaultgateway]
ifaddr [-dns index [dns server address]] [-ipsharing used[ip address]]
ifaddr [-autodns used]
-print Display LAN information and configuration.
-ip Specify ip address.
-mask Set Internet subnet mask.
-gate Specify default gateway ip address
-dhcp Set DHCP client service flag (On/Off).
-sntp Set SNTP server mode and specify IP address.
-autodns Specify the way to obtain DNS Server (0:Manual/1:Auto).