Welltech FXS SIP Gateway V.2.9 User Manual
Page 96
- 84 -
FXS Gateway Overview
Current debug type enabled :
Debug Mode is open
DEBUG-> SIP MSG
usr/config$
Figure 21-13 debug –status command
21.7.3 [reboot]
After [commit] command, type [reboot] to reload Gateway in new configuration.
The procedure is as below:
usr/config$ reboot
Start to Unregister ...
Unregister complete...
. Rebooting...It will take 40 seconds....Attached TCP/IP interface to cpm unit 0
Attaching interface lo0...done
HTTPD initialized...
Flash Check
WorkMode : PROXY_MODE
Start registering to Proxy server
AC4804[0] is ok
AC4804[1] is ok
successful 2 2
Initialize OSS libraries...OK!
VP v1.42 stack open sucessfully.
login:
Figure 21-14 reboot command
21.7.4 [flash]
Clean the configuration stored in flash.
usr/config$ flash
Flash memory information and configuration
Usage:
flash [-clean]