Welltech FXS SIP Gateway V.2.9 - Manual (Page 128)

- 116 -
FXS Gateway Overview
-clean: Will clear all password setup, and change null.
Note:
Gateway Login name only use [root] or [administrator]. [root] and [administrator]
have the same authorization, except commands that can be excuted by [Login name:
root] only [passwd –set root], [rom –boot], [room-boot2m] and [flash –clean].
For example:
usr/config$ passwd -set root root1234
Setting
login: root
Password: root1234
OK
usr/config$
Figure 21-53 passwd –set command
sr/config$ passwd -clean
Please wait a moment!!
Clean password OK.
usr/config$
Figure 21-54 passwd –clean command
21.7.21 [line]
User can use [line] command to check the registered status, it only useful for
proxy mode. Also it can use to configure hotline service.
usr/config$ line
Gateway line setting information and configuration
Usage:
line [-hotline [Port DestIP TELnum]]
line -print
-print Gateway line information.
-hotline Set Hot line information.
Example:
line -hotline 1 192.168.4.69 628 2 192.168.4.200 999
line -print
Figure 21- 55 line command List