Welltech FXS SIP Gateway V.2.9 User Manual
Page 42
- 30 -
FXS Gateway Overview
This Chapter covers the basic how to upgrade FXS Gateway ROM
Version.
4.4
Configure the gateway into the hotline mode
Step 1. Configure the FXS Gateway Line Status. Click Line Status on the
navigation panel. In the Line Status screen, input Destination Address and
Remote TEL(e.g. Destination Address: 192.168.19.221, Remote TEL: 6091), and click
the OK button.
If you would like to send SIP invitation with non well-known port 5060, please
append “:” plus port number followed by Destination Address(e.g.
192.168.19.221:8088)
Figure 4-7 Configure the hotline info
Step 2. Click Commit Data on the navigation panel. In the Commit Data screen, click
the Commit button.
Step 3. Click Reboot Data on the navigation panel. In the Reboot FXS System screen,
click the Reboot button. It will take 40 seconds to reboot.
P.S. Low case “x” of “Destination Address” means disabled hotline.
Chapter 5
Upgrade ROM Version
5.1
Before you start downloading
Step 1. Please confirm Host PC, which is installed as TFTP / FTP server and device
is in available network.
Step 2. Remember the current configuration, such as [SIP Information],
[Phone