Welltech FXS SIP Gateway V.2.9 - Manual (Page 76)

- 64 -
FXS Gateway Overview
Chapter 21
Command List
This section introduces the command line interface and lists all of the
command
s.
21.1 Hyper Terminal Setting
A terminal emulator is needed when using RS-232 port to configure
Gateway. There are kinds of terminal emulator software. Here, we use Microsoft
HyperTerminal
to depict how to set up terminal emulator:
Step 1. Execute the Hyper Terminal program, and then the following
windows will pop-up on the screen (START
Program
files Accessories Communication Hyper Terminal).
Figure 21-1 Connection Description
Step 2. Define a name such as [3502] for this new connection, after pressing [OK]
button.
Figure 21-2 Connection Description
Step 3. The next windows appear, and then choose COM1/2 Port, which
you are going to use.