Welltech FXS SIP Gateway V.2.9 - Manual (Page 31)

- 19 -
FXS Gateway Overview
3.4 DHCP mode
Step 1. Configure the FXS Gateway IP mode to DHCP Mode.
Click [Network Interface] on the navigation panel. In the Network
Interface screen, enable the DHCP function if you are using the cable
modem or DHCP server and click the
[OK] button.
Figure 3-4 Network Interface
Step 2. Click [Commit Data] on the navigation panel. In the Commit
Configuration
Data screen, click the Commit button.
Step 3. Click [Reboot System] on the navigation panel. In the FXS Gateway screen,
click the [Reboot] button. It will take 40 seconds to reboot.
Step 4. Close the current browser windows and launch your web browser
again.
Enter the new IP address in the Location or Address field.
3.5 IP Sharing Configuration
3.5.1 One Sets FXS Gateway
The function is only for the user who is using the IP Sharing device. It is meaning
that Gateway is connected to the IP Sharing device.
The IP Sharing Device must support the DMZ or Virtual server functions
An e.g. such as ADSL network is in the following.