Welltech FXS SIP Gateway V.2.9 User Manual
Page 120
- 108 -
FXS Gateway Overview
-rtptype: the packages of voice (0~63).
-sigtype: the package of call signal (0~63).
Note:
The value of rtptype and sigtype is from 0 to 63. Its working if it supported by your
network.
For example:
usr/config$ tos –print
IP Packet ToS information:
Signalling Packet:
DSCP Code : 0
Media Packet
:
DSCP Code : 0
usr/config$
Figure 21-39 tos -print command
21.7.17 [phone]
Gateway progress tone is configurable. Default tone value is set according to U.S.
tone specification. Users may adjust the values according to their own country’s tone
specification or users-defined tone specification.
usr/config$ phone
Phone ringing , ringback tone , busy tone , dial tone setting and notes
Usage:
phone [-ring [freq
] [ringON ] [ringOFF ] [ringLevel]]
[-rbt [freqHi ] [freqLo ] [freqHiLev] [freqLoLev]
[Tone1ON] [Tone1OFF] [Tone2ON ] [Tone2OFF ]]
[-bt
[freqHi ] [freqLo ] [freqHiLev] [freqLoLev]
[Tone1ON] [Tone1OFF] [Tone2ON ] [Tone2OFF ]]
[-dt
[freqHi ] [freqLo ] [freqHiLev] [freqLoLev]
[Tone1ON] [Tone1OFF] [Tone2ON ] [Tone2OFF ]]
[-flash [freqLo ] [freqHi ]]
[-level [loopCurrentLevel] [onhookLineVoltageLevel ]]
phone [-print [ring]|[rbt]|[bt]|[dt]|[flash]]