Welltech FXS SIP Gateway V.2.9 - Manual (Page 125)

- 113 -
FXS Gateway Overview
-s IP address of TFTP/FTP server (mandatory)
-f file name(mandatory)
-method download via TFTP/FTP (TFTP: mode=0, FTP: mode=1)
-ftp specify username and password for FTP
Note:
This command can run select one option in 'app', 'boot',
, 'dsptest', 'dspcore', and 'dspapp'.
Example:
rom -method 1
rom -ftp vwusr vwusr
rom -app -s 192.168.4.101 -f app.bin
usr/config$
Figure 21-48 rom command list
Parameter Usages:
-print: show versions of all rom files.
-app, boot, boot2m, dsptest, dspcore, dspapp, ht: To update main Application program
code, Boot code, DSP testing code, DSP kernel code, or DSP application
code, and Hold Tone file.
Note:
Most of all, the Rom file needed to get upgrade is App or Boot2m. Please
check the exactly Rom file before doing download procedure.
-s: To specify TFTP server’s IP address when upgrading ROM files.
-f: To specify the target file name, which will replace the old one.
-method: To decide using TFTP or FTP as file transfer server. [0] stands for TFTP,
while [1] stands for FTP.
-ftp: If users choose FTP in above item, it is necessary to specify pre-defined
username and password when upgrading files.
For example:
usr/config$ rom –print
Download Method : TFTP
Boot Rom : sdboot.200
Application Rom : 4asip0519.BIN
DSP App : 48302ce3.140
DSP Kernel : 48302ck.140