Welltech FXS SIP Gateway V.2.9 User Manual
Page 64
- 52 -
FXS Gateway Overview
LABEL
DESCRIPTION
Port No.
The field displays the Call signal port number of caller
New Record
Index
Set up an Index number from 1 to 100, to the parameter to show
specific phone number.
Name
Set up a descriptive name (max 20 byte).
IP Address
Set up IP Address or Domain Name.
E164
Set up e164 (telephone) number (max 20 digits)
Port No.
Call signal port number of caller
Add Data [button]
Click [Add Data] button to insert the information table.
OK [button]
Click [OK] button to save your changes back to the FXS Gateway
volatile memory.
Note:
The e164 number defined in phone book will fully carry to destination. It is not just
a representative number for destination’s IP Address. In other words, user dial this
e164 number to reach destination, destination will receive the number and find out if it
is matched to its e164, including Line number in some particular device.