Welltech FXS SIP Gateway V.2.9 User Manual
Page 40
- 28 -
FXS Gateway Overview
Figure 4-5 Configure the Proxy info
Step 3. Click Commit Data on the navigation panel. In the Commit Data screen,
click the Commit button. In the Commit Data screen to Display Commit to Flash
OK!, When the Commit Data Ok.
Step 3. Click Reboot Data on the navigation panel. In the Reboot FXS System screen,
click the Reboot button. It will take 40 seconds to reboot.
4.3
Configure the gateway into the Gateway routed mode
Step 1. Configure the FXS Gateway SIP Configuration. Click SIP Information on
the navigation panel. In the SIP Information screen, select Gateway
routed Mode function.
Step 2. To change the SIP information from your service provider Proxy IP Address,
Line1 Number, Lin1 Account, Line1 Password, (e.g. Proxy IP
Address:
192.168.14.155, (e.g. Line1 Number: 6091, Line1 Account: 6091, Line1 Password:
6092), and click the OK button.