Welltech FXS SIP Gateway V.2.9 User Manual
Page 59
- 47 -
FXS Gateway Overview
LABEL
DESCRIPTION
Busy Tone
Setting the played tone type, when destination is busy.
Dial Tone
Setting the played tone type, when hook off a phone set of
workable FXS Gateway.
2nd Dial Tone
To configure the value of the local 2nd dial tone.
OK [button]
Click [OK] button to save your changes back to the FXS Gateway
volatile memory.
Note:
For tone simulation, FXS Gateway adopts dual frequencies as traditional
telephone does. If users want to have their own call progress tone, they can change
the value of tones. High and Low frequency/level/cadence can be configured
respectively.
ringing frequency: 15 ~ 100 (Unit: Hz)
ringing ring ON/OFF: 0 ~ 8000 (Unit: ms)
ringing level: 0 ~ 94 (Unit: V)
tone frequency: 0 ~ 65535 (Unit: Hz)
tone freqLevel: 0 ~ 65535 (Unit: mVrms)
tone Tone ON/OFF: 0 ~ 8000 (Unit: ms)