3 default settings, 4 front panels – Welltech FXS SIP Gateway V.2.9 User Manual
Page 15
- 3 -
FXS Gateway Overview
Two/Four RJ11 Telephone Port (FXS).
DC 12V input.
System Monitoring
System status (Link, Ready, Status, TEL, Power).
Remote Firmware Upgrade
You can use FTP/TFTP to perform configuration backup/restore and firmware upgrade
for the FXS Gateway from a remote location.
Security
Password protection for system management
VLAN
1.3
Default Settings
The following are the settings of the defualt profile
The FXS gateway has two accounts to let user configure the settings. One is root,
another is administrator. The difference between root and
administrator is that the administrator cannot configure the SIP
Configuration and Upgrade 2M version firmware.
Login: root (or administrator)
Password: Null (default)
1.3.1 IP
Parameters
IP Address = 10.1.1.3
Subnet mask = 255.0.0.0
Default gateway = 10.1.1.254
1.3.2
Telnet and Web Login Password
Login = root
Password = Null (default)
1.4
Front Panels
The LEDs on the front panel indicate the operational status of the Gateway.
Figure 1-1 2FXS Gateway Front Panel