Preface, About this manual, Manual organization – Verilink FrameStart FSM (34-00299.E) Product Manual User Manual
Page 9: Reface
P r e f a c e
ix
C
HAPTER
0
P
REFACE
About this Manual
This reference guide for the Verilink FrameStart FSM integrated access
device (I
2
AD) describes unit features and specifications, configuration, and
cabling. It is not a users guide containing step-by-step procedures. This
manual is designed to be used as a reference regarding commands, interface
ports, configuration parameters, and other information specific to your FSM
unit.
Manual Organization
The chapters and appendices in this manual are arranged for quick reference
when you need it. You do not have to read previous chapters to understand
the subsequent chapters. Appendices are designed to complement the main
chapters.
•
Chapter 1, “About the FrameStart FSM” – This chapter describes product
features and capabilities.
•
Chapter 2, “Installation”– This chapter describes unit port connections and
powering information.
•
Chapter 3, “Web Server Interface” – This chapter describes the menu
screens and configuration parameters accessed through the Web Server
interface.
•
−
This chapter describes the menu screens and
configuration parameters accessed through the VT100 interface.
•
Chapter 5, “Front Panel LCD Interface”
−
This chapter describes how to
configure your unit using the front panel.
•
Appendix A, “Specifications”– This appendix defines the specifications for
the FrameStart FSM. In addition, this section provides ordering information
and all the connector pin assignments for the interfaces on the back of the
FSM unit.
•
−
This appendix defines which MIBs
(Management Information Base files) are supported by the FrameStart FSM
SNMP agent. In addition, instructions are provided for loading these MIB
files into most SNMP management stations.