Verilink FrameStart FSM (34-00299.E) Product Manual - Manual (Page 100)

4-26 F r a m e S t a r t F S M
Allow CHAP This parameter lets the peer negotiate for CHAP.
Values: No, Yes
Default: No
PAP Username Type the appropriate PAP Username in this field to log on to the peer.
Values: (user established)
Default: Username
PAP Password Enter the password necessary to log on to the peer under a given PAP
Username.
Values: (user established)
Default: (none)
CHAP Username Type the appropriate CHAP Hostname in this field to challenge the peer.
Values: (user established)
Default: Hostname
CHAP Secret Enter the Secret (i.e., password) necessary to challenge the peer.
Values: (user established)
Default: Secret
Initiate Negotiation Determines whether the port actively negotiates with the peer site or passively
waits for negotiation requests.
Values: Yes, No
Default: Yes
Parameters to Negotiate
The table displayed near the bottom of the PPP Service Details screen shows
which parameters are set to be negotiated. You can specify which parameters
should be negotiated by selecting the desired option. The table below
describes the parameters that can be negotiated.
Parameter Description
Protocol Header
Compression Compresses PPP protocol headers.
Default = Yes
IPCP Compression Compresses TCP headers using Van Jacobsen compression.
Default = Yes
MRU Informs the peer that the implementation can receive larger
packets, or requests that the peer send smaller packets.
Default = Yes
HDLC Address
Compression Negotiates the compression of high-level data link control
(HDLC) addresses.
Default = Yes
IP Address Dynamically negotiates for IP addresses; otherwise, it is
assumed both sides know each other’s IP addresses.
Default = Yes