Verilink FrameStart FSM (34-00299.E) Product Manual - Manual (Page 51)

W e b S e r v e r I n t e r f a c e 3-27
Allow PAP This parameter is used to allow the peer to negotiate for PAP.
Values: No, Yes
Default: No
Allow CHAP This parameter is used to allow the peer to negotiate for CHAP.
Values: No, Yes
Default: No
PAP Username This field is used (along with the PAP Password) to log on to the peer. Type
the appropriate PAP Username in this field.
Values: (user established)
Default: Username
PAP Password This field is used to enter the password necessary to log on to the peer under
a given PAP Username.
Values: (user established)
Default: (none)
CHAP Username This field is used (along with the CHAP Secret) to challenge the peer. Type
the appropriate CHAP Hostname in this field.
Values: (user established)
Default: Hostname
CHAP Secret This field is used to enter the Secret (i.e., password) necessary to challenge
the peer.
Values: (user established)
Default: Secret
Initiate Negotiation Determines whether the port actively negotiates with the peer site or passively
waits for negotiation requests.
Values: Yes, No
Default: Yes
Parameters To Negotiate
The table displayed near the bottom of the PPP Service Details screen shows
which parameters are set to be negotiated. You can specify which parameters
should be negotiated by clicking on the pull-down menu next to each
parameter and selecting the desired option. The table below describes the
parameters that can be negotiated.
Parameter Description
Protocol Header
Compression Provides a method to compress PPP protocol headers.
Default = Yes
IPCP (IP Control
Protocol)
Compression Configures, enables, and disables the IP protocol modules on
both ends of a point-to-point link.
Default = Yes