Verilink FrameStart FSM (34-00299.E) Product Manual - Manual (Page 137)

F r o n t P a n e l L C D I n t e r f a c e 5-19
Select the Set Password option to open the ENTER PASSWORD screen; a
blinking cursor appears over the first character or digit to be entered or
modified. To establish a unit password, press the
SCROLL button to increment
the characters and digits (0– 9, A– Z, a– z). Pressing the SELECT button
accepts the value and moves the cursor to the right. After entering all the
characters that define your password, press the
SELECT button; the menu will
then prompt you to “Verify” the password. Reenter the password exactly as
before and again press
SELECT . A correctly entered password advances the
unit to the Main Menu screen. An incorrectly entered password returns you to
an “Idle” screen. If unsuccessful, reenter the password.
To disable the password function, select the Set Password option and then,
without pressing the
SCROLL button, press the SELECT button until the
cursor passes through all eight character spaces. The menu will then prompt
you to “Verify” the password. Reenter the password exactly as before and
again press
SELECT .
Log Out Menu
If the unit is not programmed with a password, you can end the session with
the computer and leave the menu system by pressing
EXIT while in the Main
Menu. If a password has been programmed, the unit prevents an inadvertent
log out by requiring you to press
SELECT in the Log Out menu.