Verilink FrameStart FSM (34-00299.E) Product Manual - Manual (Page 50)

3-26 F r a m e S t a r t F S M
Figure 3.17 PPP Service Details Screen
ACCM The Asynchronous Control Character Map (ACCM) configuration option
provides a method to negotiate the use of control character transparency on
asynchronous links.
Values: 0–4294967295
Default: 4294967295
MRU (Maximum
Receive Units)
This configuration option may be set to inform the peer that the
implementation can receive larger packets, or to request that the peer send
smaller packets.
Values: 128–4096
Default: 1500
Port IP Address Set your Internet Browser to this IP address to access the Web Server
interface.
Default: 192.168.1.2
Peer IP Address Enter the IP address of the peer that will negotiate authentication protocols.
Default: 192.168.1.3
Virtual PPP over Endpoint name over which to send PPP encapsulated data (i.e., PPP over
Frame Relay). Valid only when the PPP interface is Virtual.
Auth Challenge
Interval
The time interval (in seconds) between CHAP challenges. A value of “0”
(zero) disables the authentication challenge.
Values: 0
−
3600
Default: 0 (disabled)