Verilink FrameStart FSM (34-00299.E) Product Manual - Manual (Page 59)

W e b S e r v e r I n t e r f a c e 3-35
The Endpoint Details screen provides the following user-activated buttons:
Endpoint Service Details Screen
Clicking on the “Service Details” button at the bottom of the Endpoint Table
screen displays the typical Service Details screen. Refer to Service Details
Screen on page 3-17 for a complete description of this type of screen.
DLCI Details Screen
The DLCI Details screen (Figure 3.25) lets you access the configuration
parameters described in the paragraphs below. To bring up this screen, click
the “Endpoint DLCI Details” button on the Endpoint Table screen, or click
the “DLCI Details” button from the Endpoint Details screen.
Figure 3.25 DLCI Details Screen
The first three configuration parameters (Protocol Encapsulation, Proprietary
Traffic Type, and Proprietary Offset) are used by the unit to gather statistics.
For in-band management, “RFC 1490” must be the encapsulation method.
Button Function
Submit Sets any values that have been changed.
Service Details Opens the Service details screen showing the selected service's
settings.
DLCI Details Displays details of the selected DLCI.
Delete Endpoint Deletes the currently displayed endpoint.
Refresh Refreshes data on the current page.