Teac GigaStudio 4 - Manual (Page 94)

GigaStudio 4 Reference Manual 94
Frequency (0.1 to 10Hz)
This sets the LFO frequency. The Pitch LFO frequency is superimposed on the waveform when P-LFO is
selected with the Envelope/LFO buttons toward the right of the waveform display. Also note that a node is
located toward the left side of the waveform. You can adjust frequency by dragging this node.
Control Source
This allows controlling the LFO depth from several possible sources, as selected from a drop-down menu.
0 – Internal:
The LFO depth is controlled solely by the Internal Depth control.
1 – Mod Wheel: An external mod wheel controller determines the LFO depth, with its maximum limit set by
the External Depth control.
2 – Breath Control:
An external breath controller determines the LFO depth, with its maximum limit set by
the External Depth control.
3 – Int+Mod Wheel:
This allows for a constant amount of LFO depth supplied by the Internal LFO function,
with additional modulation provided by an external mod wheel. These work as described above under 0 -
Internal and 1 - Mod Wheel.
4 – Int+Breath Ctrl:
This allows for a constant amount of LFO depth supplied by the Internal LFO function,
with additional modulation provided by an external breath controller. These work as described above under 0
- Internal and 2 – Breath Control.