Teac GigaStudio 4 - Manual (Page 123)

GigaStudio 4 Reference Manual 123
Edit an effect: Click on the EDIT button below the effect name field. The effect’s GUI will appear. Note: The
EDIT button is not a toggle. To close the GUI, you must click on the GUI’s close button.
Bypass all channel insert effects:
Click on the channel bypass button (INS) toward the upper left. This button
is visible in both wide and narrow views. It toggles between bright green (effects loaded and active) to a dim
green (effects loaded but inactive). If this button is gray, it means no effects are inserted in the channel. Note:
The channel INS button overrides the state of individual effects. If the loaded effects are not bypassed, but the
INS button indicates that all effects are bypassed (dim green), then the inserted effects will not affect the signal
going through the channel.