Teac GigaStudio 4 - Manual (Page 101)

GigaStudio 4 Reference Manual 101
Release (0 to 60 seconds)
(F) Release specifies how long it will take for the envelope to fall back to the minimum filter cutoff frequency
from the current sustain level.
•
If Decay 2 is set to “Infinite,” the release phase will begin when the note is released.
• If Decay 2 is set between 0 and 60 seconds, then the release phase will start after that amount of time has
elapsed.
• If you release the note before the Decay time has elapsed, then the release will begin upon releasing the
key.
Filter Envelope Modulation
The Filter Envelope Modulation controls allow real-time MIDI control over the Filter Envelope Attack,
Decay and Release parameters.