beautypg.com

17 – specifications, Ratings, Input/output ratings – Teac DP-32 User Manual

Page 93: Audio performance, Operating requirements, Analog audio input/output ratings, Control input/output ratings

background image

TASCAM DP-32

93

17 – Specifications

Ratings

Recording media

SD card (512 MB to 2 GB)
SDHC card (4 GB to 32 GB)

File system

SD card (512 MB to 2 GB): FAT16
SDHC card (4 GB to 32 GB): FAT32

Input/output ratings

Analog audio input/output ratings

INPUT A to H jack
XLR type (Balanced)

Connector: XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance: 2.4 kΩ
Rated input level: –14 dBu
Maximum input level: +2 dBu

Standard jack type (Balanced)

Connector: 6.3 mm (1/4") TRS standard jack
Input impedance:

Above 22 kΩ
1 MΩ (INPUT H only, when LINE-GUITAR switch is

set to GUITAR)

Rated input level: +4 dBu
Maximum input level: +20 dBu

STEREO OUT jack

Connector: RCA pin jack
Rated output level: –10 dBV
Maximum output level: +6 dBV
Output impedance: 200 Ω

EFFECT SENDS jack

Connector: 6.3 mm (1/4") TS standard jack
Rated output level: –10 dBV
Maximum output level: +6 dBV
Output impedance: 200 Ω

MONITOR OUT jack

Connector: 6.3 mm (1/4") TRS standard jack
Rated output level: –2 dBu
Maximum output level: +14 dBu
Output impedance: 200 Ω

PHONES jack

Connector: 6.3 mm stereo jack
Maximum output level: 70 mW+70 mW or more

(THD+N 0.1% or less, 32 Ω load)

Control input/output ratings

MIDI input (MIDI IN)

Connector: 5-pin DIN
Format: Standard MIDI format

MIDI output (MIDI OUT)

Connector: 5-pin DIN
Format: Standard MIDI format

USB port

Connector: USB 4-pin mini-B type
Format: Mass Storage Class USB 2.0 HIGH SPEED

REMOTE jack

Connector: 2.5 mm TRS jack

Audio performance

Frequency response

INPUT (MIC/LINE) q STEREO OUT/EFFECT SENDS/

MONITOR OUT: 20 Hz to 20 kHz, +1 dB/–1 dB

Distortion

INPUT (MIC/LINE) q STEREO OUT/EFFECT SENDS/

MONITOR OUT: 0.01% or less

S/N ratio

INPUT (MIC/LINE) q STEREO OUT/EFFECT SENDS/

MONITOR OUT: 90 dB or more

Operating requirements

See the TASCAM website (http://www.tascam.com/) for

updated information about OS compatibility.
Windows

Pentium 300 MHz or faster
128 MB or more memory
USB port (USB 2.0 recommended)

Macintosh

Power PC, iMac, G3, G4 266 MHz or faster
64 MB or more memory
USB port (USB 2.0 recommended)

Recommended USB host controller

Intel chipset

Supported OS

Windows: Windows XP, Windows Vista, Windows 7
Macintosh: Mac OS X 10.2 or later

This manual is related to the following products: