Teac DP-32 - Manual (Page 79)

TASCAM DP-32
79
13 - Exchanging Data with a Computer
Exporting tracks
1. When the recorder is stopped, press the MENU
button to open the
MENU
screen.
2. Use the JOG/DATA dial or the CURSOR (5/b/g/t)
buttons to select (highlight green)
AUDIO DEPOT
,
and then press the F4 (t) button.
3. Press the F2 (
EXPORT
) button.
The
EXPORT
screen opens showing a list of tracks
that contain audio data.
NOTE
Song tracks that do not have audio data are not displayed in
the file list.
4. Use the JOG/DATA dial to select (highlight blue) the
track that you want to export, and then press the
F2 (4) button.
A check mark 4 appears in the box next to the
selected track.
By checking multiple boxes (4), you can export more
than one track at once.
NOTE
To remove a check mark 4 from a box, press the F2 (4)
button again while the track is selected (highlighted blue).
5. After you finish putting checks (4) next to the
tracks you want to export, press the F4 (t) button.
A confirmation message appears.
6. Press the F2 (
YES
) button to export the selected
track to the AudioDepot folder.
NOTE
When a track file with the same name already exists in the
AudioDepot folder, a number is added to the file name end,
so the existing track is not overwritten.
7. After a pop-up message appears, the
Audio Depot
screen reopens.
8. Press the HOME button to return to the Home
screen.
9. Connect the unit to a computer. (See "Connecting
to a computer" on page 76.)
10. Operate the computer to copy track files from the
AudioDepot folder of the SD card to the computer.
11. After exporting track files to the computer,
disconnect the unit from the computer using the
proper procedures, and then unplug the USB cable.
(See "Disconnecting" on page 77.)
Deleting files from the
AudioDepot folder
1. When the file list is displayed, use the JOG/DATA
dial or the CURSOR (5/b) buttons to select the
files that you want to delete.
2. Press the F3 (
DELETE
) button to open a
confirmation message.
3. Press the F2 (
YES
) button to confirm deletion.
If you want to delete multiple files, repeat the
procedure above.