8 - track editing, Move/paste, Move/insert – Teac DP-32 User Manual
Page 59: Open (insert silence), Cut (remove part)
TASCAM DP-32
59
8 - Track Editing
MOVE/PASTE
IN
OUT
TO
IN
OUT
TO
The audio data between the IN and OUT points on the
source track is removed and pasted on the target track
from the TO point. This operation leaves a silence between
the IN and OUT points on the source track.
This operation overwrites recorded data on the target
track. Therefore, the length of the target track is not
changed.
The following parameters are used in this operation.
• SOURCE Track
• IN/OUT/TO
• TARGET Track
MOVE/INSERT
IN
OUT
TO
IN
OUT
TO
The audio data between the IN and OUT points on the
source track is removed and inserted in the target track
starting from the TO point. This operation leaves a silence
between the IN and OUT points on the source track.
This operation inserts recorded data into the target track
starting from the TO point. Therefore, the target track
becomes longer.
The following parameters are used in this operation.
• SOURCE Track
• IN/OUT/TO
• TARGET Track
OPEN (Insert Silence)
IN
OUT
IN
OUT
This function inserts silence between the IN and OUT
points on the selected track.
This function splits the track at the IN point and shifts the
recorded data after the IN point to after the OUT point.
Therefore, the track becomes longer.
The following parameters are used in this operation.
• TARGET Track
• IN/OUT
CUT (Remove Part)
IN
OUT
IN
This function cuts (deletes) the audio data between the
IN and OUT points on the selected track, and shifts the
remaining recording after the OUT point forward to the IN
point. Therefore, the track becomes shorter.
The following parameters are used in this operation.
• TARGET Track
• IN/OUT