Teac DP-32 - Manual (Page 35)

TASCAM DP-32
35
5 - Song Management
NOTE
• The 0 icon appears next to the currently loaded song.
• A lock icon appears next to any protected song.
3. Use the JOG/DATA dial or the CURSOR (5/b)
buttons to select the desired song, and then press
the F4 (t) button to open the menu.
4. Use the JOG/DATA dial or the CURSOR (5/b)
buttons to select
LOAD
, and then press the F4 (t)
button again.
The
SONG LOAD
pop-up window appears.
5. Press the F2 (
YES
) button to load the selected
song.
NOTE
If you press the F1 (
NO
) button, the pop-up window
disappears from the
SONG LIST
screen.
6. Once the song is loaded, the pop-up window
disappears from the
SONG LIST
screen.
7. Press the HOME button to return to the Home
screen.
Creating a new song
Follow these procedures to create a new song.
1. When the recorder is stopped, press the MENU
button to open the
MENU
screen.
2. Use the JOG/DATA dial or the CURSOR (5/b/g/t)
buttons to select (highlight green)
SONG
, and then
press the F4 (t) button.
The SONG LIST screen opens.
This unit manages data in units called "songs". Ordinarily,
each project should have its own "song" file. The first step
is to load an existing song that you want to use or create a
new song.
The audio data for the recorded multitrack (TRACKS 1 to
31/32) and the master file are saved in the song.
This chapter covers basic operations, including procedures
for loading songs and creating new songs, as well as
explains various song management functions.
Editing names
You can edit the name of a song in a pop-up window
when creating (
SONG CREATE
), saving (
SONG SAVE
)
and copying (
SONG COPY
) the song. You can also edit
the name of a song by opening the SONG NAME EDIT
pop-up window.
SONG NAME EDIT screen
Use the following controls to edit names.
• Use the CURSOR (g/t) buttons to move the cursor.
The character at the cursor position (underlined) is the
one that can be edited.
• Use the JOG/DATA dial to change the characters at the
cursor (underline) position. You can input a maximum
of 15 characters, including ordinary symbols, numerals
and English upper and lower case letters.
• After inputting or editing the name, press the F2 ( YES
)
button to save the edited name.
Loading a song
Follow these procedures to load the song you want.
1. When the recorder is stopped, press the MENU
button to open the
MENU
screen.
2. Use the JOG/DATA dial or the CURSOR (5/b/g/t)
buttons to select (highlight green)
SONG
, and then
press the F4 (t) button.
The
SONG LIST screen opens.