Teac DP-32 - Manual (Page 26)

26
TASCAM DP-32
3 – Names and Functions of Parts
Front panel
Y PHONES jack
Use this standard stereo jack to connect stereo
headphones.
Use the MONITOR LEVEL knob on the top panel to
adjust the volume output from this jack.
CAUTION
Before connecting headphones, use the MONITOR
LEVEL knob on the top panel to set to the volume to
minimum. A loud noise could occur, which might result
in damage to equipment and people's hearing.
U REMOTE jack (2.5mm TRS)
Connect a TASCAM RC-3F footswitch (sold separately)
here to remotely control a variety of operations,
including punching in and out (starting and stopping
recording).
I Disc tray
When the
CD
menu is open, press the F3 (-) button
to open the disc tray and then load or remove a disc.
Push the tray to close it. The tray will click when shut.
O Access indicator
This indicator lights when the unit is accessing (reading
or writing) a disc.
P Eject button
When the
CD
menu is displayed, press to open the
disc tray.
A Emergency eject hole
If the disc tray does not open, press the button inside
this hole to forcibly open the disc tray. (See "Forcing
disc ejection" on page 82.)
CAUTION
Do not use this button at any time other than an
emergency. Before doing this, turn the power off (put in
standby) and disconnect the AC adaptor.