Teac DP-32 - Manual (Page 77)

TASCAM DP-32
77
13 - Exchanging Data with a Computer
• Do not disconnect the AC adaptor or otherwise cut
the power to the unit during data transfer. Doing so
will cause all the data to be lost beyond recovery.
• Do not change the names of folders inside the DP-32.
NOTE
The UTILITY folder is used, for example, to update the system
software used by the unit. In addition, do not delete or
change the names of individual files in the Song subfolder
inside the MUSIC folder. You can, however, delete an entire
Song folder if you no longer need that song.
Disconnecting
Follow these procedures to disconnect the USB
connection correctly.
CAUTION
When transferring data, do not disconnect the unit or
remove the USB cable. Doing so could cause data on the
computer or this unit to be damaged.
NOTE
When disconnecting from a computer, the procedure
on the computer might be called "eject", "unmount'' or
"remove".
ª Disconnecting from computers running
Windows XP, Windows Vista or Windows 7
Follow these procedures to disconnect from computers
that use Windows XP, Windows Vista or Windows 7
operating systems.
A PC card icon and arrow appear in the taskbar (usually at
the bottom right of the screen).
1. Left click on this icon to open a pop-up bar. Click
on this pop-up bar to disconnect this unit from the
computer.
2. After a message appears on the computer screen
saying that the unit can be disconnected, press the
applicable function key to disconnect it from the
computer. After that, unplug the USB cable.
The Home screen opens on the display.
CAUTION
If a message appears on the computer screen saying
that this unit cannot be disconnected safely, do not
disconnect the USB cable.
Close all the computer programs and windows that are
accessing files on this unit, and then try the operation
again.
ª Disconnecting from Macintosh computers
1. Drag the DP-32 icon that represents this unit to the
Trash, or use Command + E to eject the DP-32.
TIP
Depending on the OS version and settings you might also be
able to eject the DP-32 icon by clicking on an eject icon next
to it in a Finder window or by using a control key.
2. After the DP-32 icon disappears from the display,
press the function key to disconnect this unit and
the computer. After that, unplug the USB cable.
The Home screen opens on the display.