Teac DP-32 - Manual (Page 75)

TASCAM DP-32
75
12 - SD Card Management
Full formatting an SD card
Use the
FULL FORMAT
item to completely format an SD
card. Using FULL FORMAT erases all files on the card and
automatically creates new MUSIC, UTILITY and AudioDepot
folders, as well as the dp-24.sys file that is necessary to use
the card with this unit.
Using Full Format, memory errors are checked during
formatting. A full format takes longer than a quick format.
CAUTION
This operation erases all the data from the SD card. This
operation cannot be undone. Confirm that you will not
lose important data before full formatting a card.
Follow these procedures to fully format an SD card.
1. When the recorder is stopped, press the MENU
button to open the
MENU
screen.
2. Use the JOG/DATA dial or the CURSOR (5/b/g/t)
buttons to select (highlight green)
FORMAT
, and
then press the F4 (t) button.
The format screen where you can choose Quick Format
or Full Format opens.
3. Use the JOG/DATA dial to select
FULL FORMAT
and press the F4 (t) button.
A
FULL FORMAT
confirmation message appears.
4. Press the F2 (
YES
) button to execute the full
format. If you want to cancel the full format, press
the F1 (
NO
) button.
5. Once the full format completes, the message
closes, but the
FORMAT
screen remains open.
NOTE
When a card is formatted, one song is automatically created
in the MUSIC folder.