Printing labels – QuickLabel Kiaro! User Manual
Page 68
Designing and Printing Labels
52
Kiaro! User Guide
Printing Labels
1
Ensure the label media has been loaded.
2
If you are printing from a third-party design application, ensure the printer driver
preferences are configured.
3
Open the label file using the appropriate software. Then choose to print the label,
and enter the number of copies you would like to print.
Note: If your software has a collate option, disable it before printing.
4
Print the labels. The Status Monitor will automatically open and display
information about printer and job status.
The job progress will be displayed in the Status Monitor.
If necessary, you can cancel the print job by choosing
Cancel Job/Reset Error
on
the Status Monitor.
5
Receive the printed labels. At the end of the job, cut the label material with the
manual cutter.
Note: Do not pull the printed labels in any direction as they exit the printer. Pulling the
labels may result in a media jam.
Related Topics: