QuickLabel Kiaro! - Manual (Page 106)

Kiaro! Maintenance Utility
90 Kiaro! User Guide
5 Enter an adjustment based on the error message table above. You will adjust either
the internal sensor or cutter sensor.
• Internal Sensor - If an optional cutter is not installed, the printer’s internal
sensor will require adjustment as described in the error message table.
• Cutter Sensor - If an optional cutter is installed, the cutter’s sensor will
require adjustment as described in the error message table.
6 Choose Save to Printer . The threshold settings will be saved.
Advanced Tab
The Advanced tab is reserved for use only by Technical Support.