Printed colors appear incorrect, Printing in one color – QuickLabel Kiaro! User Manual
Page 125
Troubleshooting
Kiaro! User Guide
109
Printed Colors Appear Incorrect
Printing in One Color
Check Point
Solution
Wrong colors are printed.
Check the image in your design applica-
tion. If necessary, make adjustments in
the Advanced Color Settings window.
Open the Control Panel of your com-
puter, and then check whether the set-
tings in the Display Properties and
Screen Properties are correct.
When the setting for the display type or
gamma coefficients is wrong, correct
colors are not displayed on the display.
The overall print quality is poor.
Use only QuickLabel Systems media for
the printer. Otherwise, a media jam or
failure may result.
Image is too bright or too dark.
Check the image in your design applica-
tion. If necessary, make adjustments in
the Advanced Color Settings window.
The image contrast is too strong or
weak.
Check the image in your design applica-
tion. If necessary, make adjustments in
the Advanced Color Settings window.
Image is faint.
Check the image in your design applica-
tion. If necessary, make adjustments in
the Advanced Color Settings window.
Check Point
Solution
The software application is set up for
single color printing.
Some software applications may allow
you to print in one color. Check the
print settings in the software applica-
tion on the computer.