Unwinding labels – QuickLabel Kiaro! User Manual
Page 149
UW-5 Unwinder
Kiaro! User Guide
133
Unwinding Labels
The unwinder automatically unwinds media into the Kiaro! for printing. This allows
for larger diameter rolls to be used as an alternative to the standard roll holder.
Note: Do not turn the unwinder mandrel by hand to unwind the media. Turning the mandrel
by hand can result in unwinder damage.
1
Ensure the power switch [3] on the unwinder is in the off position.
2
Turn the unwinder mandrel adjustment knob [4] counterclockwise to loosen the
mandrel.
3
Remove the outer flange [2] from the mandrel.
4
Orient a roll of label media and seat it on the mandrel. The media should unwind
over the top of the roll toward the printer. Ensure the side of the roll contacts the
inner flange [1].
5
Reinstall the outer flange [2] and then turn the mandrel adjustment knob [4]
clockwise to tighten the mandrel.
[3]
[1]
[4]
[5]
[2]