Initial ink filling – QuickLabel Kiaro! User Manual
Page 34
Quick Start Guide
18
Kiaro! User Guide
Initial Ink Filling
Caution: Do not turn the power off or open covers and doors such as the Roll Cover during
ink loading.
Caution: If the power is turned off or covers and doors are opened during ink loading, the
printer stops ink loading. In such a case, turn on the power to start ink loading again.
Caution: Restarting the ink loading causes extra ink waste.
1
Connect the power cord to the printer. Several power cords come with the printer.
Use the power cord appropriate for the power supply used at the installation site.
Caution: Never use a wrong power cord.
2
Connect the power cord to the outlet.
3
Press the POWER key for one second or more to turn on the power. Initial ink
filling starts automatically when the power is turned on.
When ink loading is complete, the STATUS LED changes from flashing to lit and
a beep sounds.
Note: Initial ink loading takes about 25 minutes.