QuickLabel Kiaro! - Manual (Page 105)

Kiaro! Maintenance Utility
Kiaro! User Guide 89
Note: Before adjusting the top-of-form threshold, verify that your media has been loaded and
configured correctly.
If you have already adjusted the top-of-form threshold for your reflective mark media,
and you are replacing a reflective mark media roll with an identical roll, repeating this
adjustment is not necessary.
1 Launch the Kiaro! Maintenance Utility.
From the Windows Start Menu, choose Start > All Programs > QuickLabel
Kiaro! > Kiaro! Maintenance Utility . A language and printer prompt will open.
Select a display language and the Kiaro! printer you want to connect to. Choose
OK .
2 Choose the Adjustments tab.
3 Choose Threshold Adjustment . The Threshold Adjustment window will open.
4 To read the internal sensor and cutter sensor values from the printer and set the
Internal Sensor and Cutter Sensor controls accordingly, choose Read From
Printer .
1302 Paper jam occurred Decrease NA -0.2V
1304 Paper jam occurred NA Increase +0.2V
1305 Paper jam occurred NA Decrease -0.2V
1306 Paper jam occurred NA Increase +0.2V
130C Paper jam occurred Increase NA +0.2V
1402 Gap/Mark width error Decrease NA -0.2V
1403 Gap/Mark width error Increase NA +0.2V
Error # Error Name
Sensor Adjustment
Adjust-
ment Value Internal Cutter