Preparing for moving, Preparing for shipping, Preparing for moving preparing for shipping – QuickLabel Kiaro! User Manual

Page 91

Kiaro! Maintenance Utility

Kiaro! User Guide

Choose a cleaning option.

Three cleaning options are available (light, medium, and heavy). Start with light
cleaning and then print a test label. If the issue is not resolved, repeat using the
medium cleaning method. If the issue is still not resolved, repeat using heavy
cleaning.

If multiple heavy cleanings do not resolve the issue, contact Technical Support.

Preparing for Moving

Before moving the printer a short distance in your building, such as to a different floor,
prepare it using the following instructions. This procedure will drain ink from the
printhead to avoid leakage when moving the printer a short distance.

Launch the Kiaro! Maintenance Utility.

From the Windows Start Menu, choose

Start > All Programs > QuickLabel

Kiaro! > Kiaro! Maintenance Utility

. A language and printer prompt will open.

Select a display language and the Kiaro! printer you want to connect to. Choose

Choose the

Cleaning

tab.

Choose

Moving

. Follow the on-screen instructions to complete this procedure.

Preparing for Shipping

Before shipping the printer over long distances, prepare it using the following
instructions. This procedure will drain ink from the entire printer when shipping the
printer or moving longer distances.

Ensure the message “Maintenance cartridge near full” is not displayed in the
Status Monitor. If the warning message is displayed, replace the maintenance
cartridge with a new one, and then start the work.

Note: If the Shipping function is executed while the warning message is displayed, the
maintenance cartridge would be filled with waste ink and the printer would be shut down,
incurring extra time.